Hanafy
The complete solution for removing old or poor-quality permanent makeup. This Hanafy kit brings together the three essential products for effective, controlled pigment removal: Remover No. 1, Remover No. 2, and the Activator, each in a 15 ml bottle.
Remover No. 1: A mineral-based remover with an alkaline pH (7.7). An opaque white liquid that penetrates deeply to draw unwanted pigment to the skin's surface. Shake well before use; it thickens over time, so Hanafy thinner may be used if needed.
Remover No. 2: An innovative acidic remover with a pH of 3.0, formulated with glycolic and lactic acids. A clear, ready-to-use liquid that lightens pigment while helping to even out skin texture, even over scars.
Activator: Boosts the action of Hanafy removers through osmosis. Also compatible with other types of removers.
Usage Recommendations
Clean the treatment area, disinfect with chlorhexidine, apply primary anesthetic according to product instructions, then work using 3RL needles (recommended gauges: 25/3, 30/3, or 35/3 RLLT) with short, dense, overlapping strokes, working deeper than for standard permanent makeup.
Option 1: Two full passes with Remover No. 1, allowing it to sit for 3–5 minutes between passes, then wipe with a dry cotton pad. Finish with the Activator to enhance the result.
Option 2: One pass with Remover No. 1 (leave on for 3–5 minutes), followed by one pass with Remover No. 2; wipe with a dry cotton pad. Finish with the Activator.
Option 3: One pass with Remover No. 1 (leave on for 3–5 minutes), followed by one pass with Remover No. 2; wipe with a dry cotton pad. Post-procedure care
Day 1: Clean the area several times using a cotton pad soaked in chlorhexidine. From Day 2 onwards: Apply Hanafy aftercare cream twice daily for approximately one week. Do not pick at scabs or irritate the treated area; avoid sun exposure, swimming pools, and baths for two weeks.
Precautions
There must be an interval of at least 6 weeks between treatments on the same area. Only primary anesthesia is permitted when using the remover; secondary anesthesia is not used. Avoid contact with eyes; in case of contact, rinse thoroughly with water. For external use only. Keep out of reach of children; store between 5°C and 25°C, away from direct sunlight.
Ingredients
Remover No. 1: Glycerin, Sorbitol, Aqua, Magnesium Oxide, Zinc Oxide, Magnesium Stearate, Isopropyl Alcohol.
Remover No. 2: Aqua, Lactic Acid, Glycolic Acid, Propylene Glycol, Glycerin, Sodium Hydroxide, Phenoxyethanol, Xanthan Gum, Allantoin, Ethylhexylglycerin.
Activator: Aqua, Glycerin, Sodium Chloride, Potassium Sorbate, Sodium Benzoate, Citric Acid.